 |
Top 1000 Contributor
|
|
| Overall Rating: |
|
3
out of 5
|
DID NOT WORK WITH MY BEDLINER!,
November 17, 2008
By cam9457
from Suburbs of Phila. Pa.
|
Pros: Would be an easy installation if it worked with the factory bedliner on my 04' Toyota Tacoma double cab.
Cons: DOES NOT WORK WITH MY FACTORY TOYOTA BEDLINER WITHOUT A LOT OF CUTTING.
"Once installed it's a really nice looking and functional cover.HOWEVER, with my 2004 Toyota Tacoma I had to cut off the top edge of my factory bedliner on both sides of the bed."
|
|
How often do you shop at JC Whitney.com?:
First Time
|
4 of 4 people found this review helpful.
|
Review 2 for BAKFLIP G2 HARD FOLDING TONNEAU COVER
 |
Top 50 Contributor
|
|
| Overall Rating: |
|
5
out of 5
|
Saves Gas,
October 16, 2008
By Automan
from Chicago
|
Pros: Easy to install
"I helped a friend install this on his Ford Super Duty. His primary motivation was to improve gas mileage. I can’t believe how easy it was to install. It took less than 30 minutes. Early results are showing a 10% increase in gas mileage. Not bad."
|
|
How often do you shop at JC Whitney.com?:
Multiple Times a Year
|
|
Review 3 for BAKFLIP G2 HARD FOLDING TONNEAU COVER
|
Review 4 for BAKFLIP G2 HARD FOLDING TONNEAU COVER
|
Review 5 for BAKFLIP G2 HARD FOLDING TONNEAU COVER
1 of 1 people found this review helpful.
|
Review 6 for BAKFLIP G2 HARD FOLDING TONNEAU COVER
|
Review 7 for BAKFLIP G2 HARD FOLDING TONNEAU COVER
|
Review 8 for BAKFLIP G2 HARD FOLDING TONNEAU COVER
|
Review 9 for BAKFLIP G2 HARD FOLDING TONNEAU COVER
|
Review 10 for BAKFLIP G2 HARD FOLDING TONNEAU COVER
|
Review 11 for BAKFLIP G2 HARD FOLDING TONNEAU COVER
 |
Top 250 Contributor
|
|
| Overall Rating: |
|
5
out of 5
|
BAK Folding Tonneau Works!,
September 2, 2006
By JimN
from Fairbanks, AK
| Appearance: |
|
5
out of 5
|
| Ease of Use/Installation: |
|
5
out of 5
|
| Quality/Construction: |
|
4
out of 5
|
|
"I installed the BAK Folding Tonneau Cover on my 2006 short bed Dodge Ram. The cover arrived from the manufacturer in two boxes on separate days, which caused some concern when I opened the first box and found the rails missing and no manifest or inventory to tell me they were shipped separately. All parts arrived in good condition except for one rail which had some scratches in the finish that buffed out. The weather stripping on one side of the cover was installed crooked enough to be noticable but still functions. I'd repair it, but it won't last through a 50 below Fairbanks winter anyway.
Installation was straight forward, and the fit on my truck with a tailgate cap is very tight. The front of the cover is attached with bolts to flanges on the rails. The flanges must be drilled for the bolts and the instructions show you drilling through the predrilled mounting holes in the cover. The rail flanges flex enough that I was concerned with getting a clean hole this way, so I simply used the cover holes to mark flange hole location, removed the cover, and supported the flange with a scrap 2X4 while I center punched and drilled. Total installation time was about 1 1/2 hours.
Final appearance is great, and it has already proven to be extremely handy. Instant tarp! It's going to be really nice this winter to be able to use the bed without first shoveling out a foot of snow. I just made a 400 mile round trip hauling supplies to my cabin, and on the way back with the tonneau fully secured noted about a 2 MPG improvement in fuel milage compared to other trips. The BAK claim of a 11% improvement appears to be about right for long trips."
|
|
How often do you shop at JC Whitney.com?:
Multiple Times a Year
|
4 of 4 people found this review helpful.
|