SOLO-BARIC L7 SUBWOOFERS

SOLO-BARIC L7 SUBWOOFERS Model: S10L7 Size (Inch, Cm): 10, 25.4 Impedance (Ohms): 2 or 4 DVC Max Rec Amplifier Power (Watt peak/RMS): 1200/600 Sensitivity (dB 1 watt/ 1 m): 86.8 Frequency response (Hz): 24-100 Mounting depth (Inch, Cm): 6-1/4, 15.9 Mounting cut-out square (Inch, Cm): 9-5/16, 23.7 Min Rec sealed box volume (Cu, Ft, Liters): .66, 18.7 Max Rec sealed box volume (Cu, Ft, Liters): 1.0, 28.3 Min Rec vented box volume (Cu, Ft, Liters): 1.25, 35.4 Max Rec vented box volume (Cu, Ft, Liters): 2.25, 63.8 Model: S12L7 Size (Inch, Cm): 12, 30.5 Impedance (Ohms): 2 or 4 DVC Max Rec Amplifier Power (Watt peak/RMS): 1500/750 Sensitivity (dB 1 watt/1 m): 88.6 Frequency response (Hz): 20-100 Mounting depth (Inch, Cm): 6-11/16, 16.9 Mounting cut-out square (Inch, Cm): 11-1/16, 28.1 Min Rec sealed box volume (Cu, Ft, Liters): .88, 24.9 Max Rec sealed box volume (Cu, Ft, Liters): 2.0, 56.6 Min Rec vented box volume (Cu, Ft, Liters): 1.75, 49.6 Max Rec vented box volume (Cu, Ft, Liters): 3.25, 92.1 Available in 8-, 10-, 12-, and 15-inch models, the Solo-Baric L7 still revolves around the breakthrough SoloKon™, the one-piece, injection-molded cone with full-coverage back bracing that pushes more air and creates louder bass than any like-size round subwoofer. It's good enough that KICKER uses SoloKon across the board as the cornerstone for each subwoofer in the KICKER bass-making family. SoloKon may be a rock star, but it's the unshakeable motor structure behind the scenes that propels it to the forefront. Minor tweaks have given the motor an outstanding rep—dual high-temp voice coils, poly-cotton semi-progressive spider, Spiralead™ tinsel-lead technology, highly-efficient UniPlate™ pole-piece/back plate, and a heat-reducing T-cut top plate for enormous power handling. And it's never been cooler with a new solid pole piece that disperses more heat than ever before, and more venting near the SoloKon back brace and spider landing. The distinctive cast-aluminum basket with spring-loaded terminals wraps around and protects these specialized inner workings, with the Solo-Baric crest branded into the back plate. The Solo-Baric L7 remains available in 2-Ohm or 4-Ohm DVC and conducts business from a sealed or vented box application.